Item Model |
VMC- 1276 |
| Spindle center to column |
750 mm |
| Spindle nose to table top |
150 - 760 mm |
| Vertical travel (Z-axis) |
610 mm |
| Cross travel (Y-axis) |
720 mm |
| Longitudinal travel (X-axis) |
1250 mm |
| Max. Table loading capacity |
1600 kgs |
| T-slots (width x No. x patch) |
18 (H8) x 5 x 130 mm |
| Table size |
700 mm x 1350 mm |
| Spindle Taper (ISO 50) |
BT50, or CAT 50 |
| Spindle Taper (ISO 40) |
BT40 (Std), CAT 40 or DIN 69871A (Opt) |
| Spindle speed range (ISO 50) |
50-6000 rpm (Std), 80-8,000 rpm (Opt) |
| Spindle speed range (ISO 40) |
80-8000 rpm (Std), 80-10,000 rpm (Opt) |
| Spindle Motor (Cont./30 min) |
11/15 (STD), 15/18 (OPT) KW |
| Ballscrew Dia. x Pitch |
50 mm x 10 mm x C 3 Class |
| Cutting feedrate(X-Y-Z) |
1 - 5000 m/min |
| Rappid traverse (X-Y-Z) |
X-Y: 20 m/min, Z: 16 m/min |
| Feed Motor torgue(X-Y-Z) |
16 Nm |
| Positioning Repeatability |
¡Ó0.003/300 mm (¡Ó 0.0001/12") |
| Positioning |
¡Ó0.005/300 mm (¡Ó 0.0002/12") |
| Machine weight (Approx) |
8500 kgs |
| Air required |
6 kg/cm (85 psi) |
| Power Required |
30 KVA |
| Packing for shipment |
365 x 320 x 260 cm |
| Floor space (L x W x H) |
450 x 500 x 280 cm |
| Door open width |
1300 mm (51") |
| Coolant Pump motor |
1.2 KW |
| Tool change time (tool to tool) |
7 sec (Carousel type), 2 sec for Arm Type |
| Max. Tool Length |
300 mm (12") |
| Max. Tool diameter (ISO 40) |
ø80 mm(Carousel type), ø76 mm (Arm Type) |
| Pull Stud (ISO 50) |
MAS 403-P50T (45¢X) or PS-CAT50(45¢X) |
| Pull Stud (ISO 40) |
MAS 403-P40T (45¢X) or PS-CAT40(45¢X) |
| Tool selection |
By address code, Random / bi-directional rotation |
| Tool magazine (Arm type Opt.) |
24 or 40 tools |
| Tool magazine (Carousel type Std.) |
20 tools |
